Designed for both batch and conveyorized production systems, Connect Open Front Spray Booths offer a safe and clean environment for any type of finishing operation. Our open front spray booths are designed with heavy duty construction utilizing simple and effective design elements. Airflow is drawn in through the open front, across the work area and exhausted through a filter bank in the back of the booth. The dry arrestor filters trap the airborne overspray particles before the filtered air is discharged through the exhaust system and into the atmosphere.

The Dymax UVC-5 UV Light Curing Conveyor System uses a high-intensity UV/visible light source for fast curing of adhesives, coatings and encapsulants. This cost-effective and versatile benchtop UV curing lamp is suitable for your lab or factory. It is a self-contained unit which fits on a bench and is powered from normal mains electricity.

The Dymax UVC-5 Conveyor System is equipped with a 120 mm wide Teflon® coated belt and one UV lamp. The lamp head is height adjustable on the belt, from 15mm to a maximum of 60mm (custom conveyors are available for larger objects). Curing time can be adjusted by changing the belt speed from 2 to 26 metres per minute. The intensity of up to 400 mW/cm² (UVA range) provides fast and complete cure for potting and conformal coating applications. The conveyor also features a counter to track hours of operation, an electric control unit located in the transportation device, and an air-cooled casing with an aluminium reflector for the bulb.

LabCure UV is an air cooled table top conventional (uv medium pressure lamp) curing system. This compact unit has a number of features that make especially suited for validation in the laboratory or for small-scale production of flat materials and 3D objects. The distance between the UV curing system and the conveyor is easily adjustable, along with the speed of the conveyor belt. Furthermore, the lamp output is stepless adjustable.

LabCure LED is an air cooled table top conveyor belt UV LED curing system. This compact unit has a number of features that make especially suited for validation in the laboratory or for small-scale production of flat materials and 3D objects. The distance between the UV LED system and the conveyor is easily adjustable, along with the speed of the conveyor belt. It is also benefits from low energy consumption and ozone free curing.

LabCure C LED is a conveyor belt curing system that combines UV Led and CCure. The powerful UV LED dryer with it’s longer wavelength ensures deep curing and adhesion of the ink to the substrate. The short-wave UVC radiation of the CCure module causes a forced surface curing.

By using both of these curing systems, it ensure the substrate is exposed to a minimal heat load. Furthermore, the low energy consumption and ozone free curing make this UV conveyor belt dryer especially suited to applications that require the curing of special UV inks, UV varnishes and UV adhesives.